"650 V Stars "Custom, Classic & Dragstar"
Flasher replacement for
aftermarket turn signals
Work done by "Jeff Sweigart"
This is a cheaper way to get your turn signals
flashing at the proper intervals after you have installed aftermarket turn
signals.
The new turn signals have improper resistance for the stock turn signal flasher
to function properly. In most cases they end up flashing very rapidly .
What we will do is replace the stock turn signal flasher with a
electro-mechanical. The flasher I used is a Grote 44530 available at Napa auto
parts.
This is the factory turn signal flasher located above the battery
Picture of
original turn signal flasher and white wiring connector removed from
flasher with 2 jumper wires installed
This shows the original flasher, the 2 jumper wires, and the location for attachment in the stock wiring connector. Then the electro-mechanical flasher installed.
This shows the replacement
electro-mechanical flasher installation and the wiring
The flasher is conveniently out of the way and take up no special room. The
original flasher is still installed, but not used.
Now your turn signals will function properly